F065
Xarici Borunun Nominal Diametri:
- HL Kriogen Avadanlıqlarının Müəssisə Standartı tərəfindən tövsiyə olunur. Müştərinin tələbinə uyğun olaraq da istehsal edilə bilər.
- Dizayn təzyiqi:
- Tövsiyə olunan ≤ 16 bar. Və ya Qaynaqlanmış Bağlantı Növünü (≤40 bar) seçir.
- Xarici Borunun Materialı
Xüsusi tələb olmadan, daxili borunun və xarici borunun materialı eyni seçiləcək.
3.1.3 Qaynaqlanmış Bağlantı Növü
model
Bağlantı
Növü
Daxili Borunun Nominal Diametri
Dizayn Təzyiqi
Material
Daxili Borunun
Standart
Qeyd
W010
00X
Statik Vakuum İzolyasiyalı Çevik Şlanq üçün Qaynaqlanmış Bağlantı Növü
DN10, 3/8"
8~40 bar
300 Seriyalı Paslanmayan Polad
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Xarici Borunun Nominal Diametri: | |
| Dizayn Təzyiqi | Daxili Borunun Materialı. | A 304-dür, | DN40, 1-1/2" | C 316-dır, |
| D 316L-dir, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Dizayn Təzyiqi |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Tövsiyə olunan ≤ DN25 və ya 1". Və ya Flanşlar və Boltlarla Vakuum Bayonet Birləşdirmə Növünü (DN10, 3/8"-dən DN80-ə, 3"), Qaynaqlanmış Birləşdirmə Növünü (DN10, 3/8"-dən DN150-yə, 6") seçir. | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Standart | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Xarici Borunun Nominal Diametri: |
| HL Kriogen Avadanlıqlarının Müəssisə Standartı tərəfindən tövsiyə olunur. Müştərinin tələbinə uyğun olaraq da istehsal edilə bilər. | Xarici Borunun Materialı | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Növü | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Standart | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Dizayn təzyiqi. | / | DN25, 1" | DN25, 1" | / | |
| Daxili Borunun Materialı. | / | DN25, 1" | DN25, 1" | / | |
| C 316-dır, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Daxili Borunun Nominal Diametri:
| Tövsiyə olunan ≤ DN25 və ya 1". Və ya Flanşlar və Boltlarla Vakuum Bayonet Birləşdirmə Növünü (DN10, 3/8"-dən DN80-ə, 3"), Qaynaqlanmış Birləşdirmə Növünü (DN10, 3/8"-dən DN150-yə, 6") seçir. | Xarici Borunun Nominal Diametri: |
| HL Kriogen Avadanlıqlarının Müəssisə Standartı tərəfindən tövsiyə olunur. Müştərinin tələbinə uyğun olaraq da istehsal edilə bilər. | Dizayn təzyiqi: |
| Tövsiyə olunan ≤ 16 bar. Və ya Qaynaqlanmış Birləşmə Növünü (≤40 bar) seçir | Xarici Borunun MaterialıXüsusi tələb olmadan, daxili borunun və xarici borunun materialı eyni seçiləcək.3.2 Dinamik Vakuum İzolyasiyalı Boru Sistemi3/S |
| 3.2.1 Qısqaclı Vakuum Bayonet Birləşdirmə Növü | model |
| Bağlantı | Növü |
| Daxili Borunun Nominal Diametri | Dizayn Təzyiqi |
| Material | Daxili Borunun |
| Standart | Qeyd |
HDB01008
Dinamik Vakuum İzolyasiyalı Çevik Şlanq üçün Qısqacları olan Vakuum Bayonet Bağlantı Növü
lDN10, 3/8"
l8 bar
| 300 Seriyalı Paslanmayan Polad C 316-dır, | Daxili Borunun Materialı. | |
| A 304-dür, | B 304L-dir,C 316-dır,D 316L-dir, | |
| E başqadır. | HLH | DB01508 |
| DN15, 1/2" | Dizayn təzyiqi: | Dizayn təzyiqi: |
| DN20, 3/4" | Dizayn təzyiqi: | Dizayn təzyiqi: |
| DN25, 1" | Dizayn təzyiqi: | Dizayn təzyiqi: |
| Xarici Borunun Nominal Diametri: | Dizayn təzyiqi: | Dizayn təzyiqi: |
Tövsiyə olunan ≤ 8 bar. Və ya Flanşlar və Boltlarla Vakuum Bayonet Birləşmə Növünü (≤16 bar), Qaynaqlanmış Birləşmə Növünü (≤40 bar) seçirXarici Borunun MaterialıXüsusi tələb olmadan, daxili borunun və xarici borunun materialı eyni seçiləcək.
Güc Vəziyyəti:
HL-HX-X-Sahə vakuum nasoslarına enerji verməli və HL Cryogenic Equipment şirkətinə yerli elektrik məlumatları (Gərginlik və Hers) barədə məlumat verməlidir.-00-X
3.2.2 Flanşlar və Boltlar ilə Vakuum Bayonet Birləşdirmə Növü
model
Bağlantı
Növü
Daxili Borunun Nominal Diametri
Dizayn Təzyiqi
Material
Daxili Borunun
Standart
Qeyd
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
300 Seriyalı Paslanmayan Polad
Design Pressure
Dizayn təzyiqi.
08 8 bardır,
16 16 bardır.
Daxili Borunun Materialı.
A 304-dür,
B 304L-dir,
C 316-dır,
D 316L-dir,
E başqadır.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Vakuum İzolyasiyalı Faza Ayırıcı Seriyası | DN10, 3/8" | Erməni
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Fransız diliXarici Borunun Nominal Diametri:X | DN15, 1/2" | |||||
| Fransız diliTövsiyə olunan ≤ 16 bar. Və ya Qaynaqlanmış Bağlantı Növünü (≤40 bar) seçir.X | DN20, 3/4" | |||||
| Fransız diliGüc Vəziyyəti:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: İsland dili
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Fransız dili08 8 bardır,00X | və 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Fransız diliSamoa dili00X | DN15, 1/2" | |||||
| Fransız diliSindhi00X | DN20, 3/4" | |||||
| Fransız diliTacik00X | DN25, 1" | |||||
| Fransız diliTayland00X | DN32, 1-1/4" | |||||
| Fransız diliÖzbək00X | DN40, 1-1/2" | |||||
| Fransız diliXosa dili00X | DN50, 2" | |||||
| Fransız diliZulu00X | DN65, 2-1/2" | |||||
| Fransız diliOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Güc Vəziyyəti:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | 300 Seriyalı Paslanmayan Polad | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Fransız diliDN15, 1/2"00X | DN15, 1/2" | |||||
| Fransız diliDN20, 3/4"00X | DN20, 3/4" | |||||
| Fransız diliDN25, 1"00X | DN25, 1" | |||||
| Fransız diliW03200X | DN32, 1-1/4" | |||||
| Fransız diliW04000X | DN40, 1-1/2" | |||||
| Fransız diliW05000X | DN50, 2" | |||||
| Fransız diliW06500X | DN65, 2-1/2" | |||||
| Fransız diliW08000X | DN80, 3" | |||||
| HVakuum gödəkçəsi şlanqı00X | DN100, 4" | |||||
| HÇin Maye Oksigen Axını Tənzimləyən Klapan00X | DN125, 5" | |||||
| HTopdansatış Qiyməti Çin Çin ISO Standart Tank 2 ...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSDinamik Vakuum Nasos Sistemi00X | Vakuum İzolyasiyalı Faza Ayırıcı Seriyası | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Fransız diliWhatsapp00X | DN15, 1/2" | |||||
| Fransız diliWeChat00X | DN20, 3/4" | |||||
| Fransız diliAlman00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Yunan
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Danimarka
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaosX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Erməni
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEston diliX | DN15, 1/2" | |||||
| HLHFrisianX | DN20, 3/4" | |||||
| HLHQucaratX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: İsland dili
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoa dili00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTacik00X | DN25, 1" | |||||
| HLHDTayland00X | DN32, 1-1/4" | |||||
| HLHDÖzbək00X | DN40, 1-1/2" | |||||
| HLHDXosa dili00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
